DESIGNING A STATE FEEDBACK CONTROLLER FOR FLYBACK SOURCE CIRCUIT FOR SOLAR PANEL APPLICATIONS
Abstract
This article presents the study results of designing control algorithm for flyback circuit. Setting up a mathematical model and giving a state feedback control algorithm for the flyback circuit basing on analyzing operating principle of the Flyback circuit. This method helps to monitor, control the overall state of the circuit and enhance operating modes for the circuit. The results and correctness of the study are shown in the simulation results as well as waveforms measured during setting a real circuit.
References
Abraham I. Pressman, “Switching Power Supply Design”, McGraw-Hill, Inc., 1991.
Lloyd H. Dixon, Jr., “Filter Inductor and Flyback Transformer Design for Switching Power Supplies”, Unitrode Power Supply Design Seminar Manual SEM-1100, 1996.
Bill Andreycak, “Practical Considerations in High Performance MOSFET, IGBT and MCT
Gate Drive Circuits”, Unitrode Application Note U-137, Unitrode Applications Handbook IC# 1051, 1997.
Bill Andreycak, “Practical Considerations in Current Mode Power Supplies, Unitrode Application Note U-111”, Unitrode Applications Handbook IC# 1051, 1997.
Lloyd H. Dixon, Jr., “Control Loop Cookbook”, Unitrode Power Supply Design Seminar Manual SEM-1100, 1996.
Lloyd H. Dixon, Jr., “Closing the Feedback Loop”, Unitrode Power Supply Design Seminar Manual SEM-700, 1990.
. Philip C. Todd, Snubber Circuits: “Theory, Design, and Application”, Unitrode Power Supply Design Seminar Manual SEM-900, 1993.
