DETERMINATION OF SETTLING PARAMETERS OF WASTE SLURRIES FOR MODELING AND DESIGN OF CONTINOUS THICKENERS: APPLICATION TO WASTE WATER TREATMENT IN COAL REFINERY PROCESS

  • Le Hai Kien Hanoi University of Science and Technology
  • Nguyen Trung Dung Hanoi University of Science and Technology
  • Nguyen Dang Binh Thanh Hanoi University of Science and Technology
Keywords: Thickener, design method, modeling, waste-water treatment, coal refiner

Abstract

DETERMINATION OF SETTLING PARAMETERS OF WASTE SLURRIES FOR MODELING AND DESIGN OF CONTINOUS THICKENERS: APPLICATION TO WASTE WATER TREATMENT IN COAL REFINERY PROCESS

References

Mishler, R.T., Settling Slimes at the Tigre Mill, Eng. Mining. J, p. 643 – 646, 94(14), 1912.

Coe, H.S and Clevenger, G.H., Methods for Determining the Capacity of Settling Tanks, Trans AIME, p. 356 – 385, 55, 1916.

Kynch, G.J, Theory of Sedimentation, Trans. Faraday Soc, p. 166-175, 48, 1952.

Talmage, W.P and Fitch, E.B, 1955, Determining Thickener Unit Areas, Ind. Eng. Chem, p. 38-41, 47, 1955.

P. Garrido, R. Burgos, F. Concha, and R. Burger, 2003, Software for the Design and Simulation of Gravity Thickener, Minerals Engineering, p. 85-92, 16, 2003.

Marcos von sperling and Carla Maria Vasconcellos Froes, Determination of the Required Surface Area for Activated Sludge Final Clarifiers based on A Unified Database, Wat. Res, p. 1884-1894, 33, 1999.

Published
2017-07-10
How to Cite
Le Hai Kien, Nguyen Trung Dung, & Nguyen Dang Binh Thanh. (2017). DETERMINATION OF SETTLING PARAMETERS OF WASTE SLURRIES FOR MODELING AND DESIGN OF CONTINOUS THICKENERS: APPLICATION TO WASTE WATER TREATMENT IN COAL REFINERY PROCESS. UTEHY Journal of Applied Science and Technology, 14, 81-85. Retrieved from http://jst.utehy.edu.vn/index.php/jst/article/view/190
Issue
Vol. 14 (2017): UTEHY Journal of Science and Technology
Section
Articles