POSTPROCESSOR FOR FIVE-AXIS CNC MACHINE
Abstract
Postprocessing is a link interface with computer systems NC and its CAM data conversion CL-compatible so that each particular CNC machine [1], [2]. It has functions to read, translate production orders given by the CAM system and convert them into NC code depending on the combination of machine and control configuration. This paper outlines the postprocessors, proposed linearization algorithm toolpath and construction of post-processing for 5-axis CNC machine.
References
Karlo Apro, Secrets of 5-Axis Machining, Industrial Press, Inc. New York 2008.
Mihir Adivarekar and Frank Liou, Developing a General Postprocessor for Multi-Axis CNC Milling Centers, Computer- Aided Design & Applications, pp.57- 68. 2012.
Tran Duc Tang, A five-axis postprocessor based on inverse kinematics transformation, Advanced Material Research 662-663, pp.525-530, 2013.
Tran Duc Tang, Calculation of machine coordinates and postprocessor for 5-axis CNC milling machine, Tuyển tập công trình Hội nghị Cơ điện tử toàn quốc lần thứ 6, tr350-356, 2012.
Chen-Hua She, Design of a generic five-axis postprocessor based on generalized kinematics model of machine tool. International Journal of Machine Tools & Manufacture, pp. 537–545, 2007
Hai-Yin Xu & Lian Hu, A novel kinematic model for five-axis machine tools and its CNC applications
Int J Adv Manuf Technol , pp.1297–1307, 2013.
Tran Duc Tang, Nguyen Phu Thuy, Vuong Si Kong, Tool path linearization algorithm and postprocessor for five-axis CNC machine. Hội nghị toàn quốc lần thứ 3 về Điều khiển và Tự động hoá - VCCA-2015, tr 860-868, 2015.
Nuodi Huang,Yong qiao Jin, and QingzhenBi, Integrated post-processor for 5-axis machine tools with geometric errors compensation. International Journal of Machine Tools & Manufacture, pp.65–73. 2015
Knut Sorby, Inverse Kinematics of Five-Axis Machines Near Singular Configurations, International Journal of Machine Tools & Manufacture 47, pp.299-306, 2007.
Erik L.J. Bohez, Compensating system errors in 5-axis NC machining, Computer-Aided Design 34, pp.391-403, 2002.
