EFFECT OF ADDITIONAL METAL POWDER RATIO AND WELDING PARAMETERS ON MECHANICAL PROPERTIES IN SUBMERGED ARC WELDING WITH ADDITIONAL METAL POWDER

Van Thoai Le; Minh Tan Nguyen; Van Nhat Nguyen

Van Thoai Le Hung Yen University of Technology and Education
Minh Tan Nguyen Hung Yen University of Technology and Education
Van Nhat Nguyen Hung Yen University of Technology and Education

Abstract

Addition of metal powder ratio which is one of factors increasing welding efficiency is affected by welding parameters in submerged arc welding with additional metal powders. A determination of the additional metal powder proportion suitable with welding parameters plays an important role in achieving high quality and productivity. This paper investigates effect of addition metal powder ratio and welding technology parameters on tensile strength and impact toughness that evaluate the weld quality. Results show that the addition metal powder ratio and welding technology parameters significantly affect tensile strength as well as impact toughness. Research result provides basis information for the application of this technology in the manufacturing and fabrication of welded structures.

References

Z. Wang et al., “Effect of Ni content on the microstructure and mechanical properties of weld metal with both-side submerged arc welding technique,” vol. 138, pp. 67-77, 2018.

S. Bhole, J. Nemade, L. Collins, and C. J. J. o. M. P. T. Liu, “Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel,” vol. 173, no. 1, pp. 92-100, 2006.

B. Beidokhti, A. Koukabi, and A. J. J. o. M. P. T. Dolati, “Effect of titanium addition on the microstructure and inclusion formation in submerged arc welded HSLA pipeline steel,” vol. 209, no. 8, pp. 4027-4035, 2009.

K. Prasad, D. J. M. Dwivedi, and m. processes, “Microstructure and tensile properties of submerged arc welded 1.25 Cr-0.5 Mo steel joints,” vol. 23, no. 5, pp. 463-468, 2008.

K. Prasad and D. J. T. i. j. o. a. m. t. Dwivedi, “Some investigations on microstructure and mechanical properties of submerged arc welded HSLA steel joints,” vol. 36, no. 5, pp. 475-483, 2008.

N. Smith, J. McGrath, J. Gianetto, and R. J. W. J. Orr, “Microstructure/mechanical property

relationships of submerged arc welds in HSLA 80 steel,” vol. 68, no. 3, p. 11, 1989.

pp. https://kimloaithudo.com/day-han-tu-dong-el-12.html, Online avilabale, 2021.

P. Lindskog and P. J. P. m. Arbstedt, “Iron powder manufacturing techniques: a brief review,” vol.

, no. 1, pp. 14-19, 1986.

pp. https://hancatvietduc.com/p/thuoc-han-camel-cm185/, 2021.