Vol. 37 (2023): UTEHY Journal of Science and Technology

Published: 2023-03-31

POLYMER-BASED CAPACITIVE MICRO-MACHINED ULTRASONIC TRANSDUCER FOR 3D PROXIMITY DETECTION

Gia-Thinh Bui

7-12
SIMULTANEOUS ESTIMATION OF TEMPERATURE-DEPENDENT THERMAL CONDUCTIVITY AND HEAT CAPACITY FOR THE CYLINDRICAL FINS

Nguyen Quan

13-19
ASSESSMENT OF THE QUALITY OF LUBRICATION OIL FOR USE ON LPG/DIESEL FUEL ENGINE

Nhinh Nguyen Van, Vi Nguyen Tuong

20-24
RESEARCH ON SHEET METAL FORMING FOR RAPID PROTOTYPING OF THE CAR BODY APPLICATIONS

Dao Chi Cuong

25-30
BUTT-JOINT BETWEEN SUS-304 STAINLESS STEEL AND SS400 STEEL BY GTAW PROCESS

Nguyen Quoc Manh, Pham Van Duoc

31-37
MECHANISM OF TRIVALENT CHROMIUM ELECTRODEPOSITION USING Cr(III)-CONTAINING BATH WITH AND WITHOUT INORGANIC ADDITIES

Nguyen Van Tai , Nguyen Van Cuong, Nguyen Hoai Tan, Huynh Thanh Thuong, Hoang Minh Thuan

38-44
FORCED TRANSVERSE VIBRATIONS CONTROL OF CANTILEVER BEAM UNDER BASE EXCITATION BY MULTIPLE DYNAMIC VIBRATION ABSORBERS

Vu Duc Phuc, Do Huy Tung, Pham Van Lieu, Trinh Thanh Nga

45-51
RESEARCH OF THE INFLUENCE OF FABRIC STRUCTURE PARAMETERS ON COVER FACTOR OF KHAKI FABRICS

Duong Phuong Thao, Gian Thi Thu Huong

52-58
SOLUTIONS TO IMPROVE THE QUALITY OF SCIENTIFIC ARTICLES PUBLISHED IN THE JOURNAL OF SCIENCE AND TECHNOLOGY OF HUNG YEN UNIVERSITY OF TECHNOLOGY AND EDUCATION

Thi-Thu-Huyen Tran, Truong Ngoc Tuan

59-65
RESEARCH FOR PRE-PRODUCTION MODEL IN VIETNAM GARMENT ENTERPRISE

Nguyen Thi Huong, Nguyen Thi Anh, Nguyen Thi Hong Khanh, Nguyen Thi Phuong

66-72
ERROR REDUCTION IN MEASUREMENT DEVICE OF SUBTRACTION OF TWO NON-ELECTRIC QUANTITIES BY STRUCTURE OF TWO TIMES INTERGAL METHOD

Pham Ngoc Thang, Bui Thi Kim Thoa

73-78
BUILDING THE STANDARD ALLOWED MINUTE TO MANUFACTURING SWIMWEAR PRODUCTS IN HUNG LONG GARMENT AND SERVICE JOINT STOCK COMPANY

Nguyen Thi Xuan, Duong Thi Thuy, Vu Thi Oanh, Pham Huu Dong

79-84
STUDY ON THE ELASTIC ELONGATIONPROPERTY OF FABRICS SILK WHEN DESIGN THE CUSTUME FOR CHEONGSAM

Nguyen Thi Van, Tran Thi Minh

85-90
RESEARCH AND DEVELOPMENT OF 2D TECHNICAL SAMPLES BY CALIBRATING SAMPLES ON 3D SOFTWARE

Truong Thi Hoang Yen, Nguyen Thi Nhung, Pham Van Quyen, Tran Thi Ung

91-96
STUDY ON THE CHANGE OF SOME YARN QUALITY CHARACTERISTICS AFTER WINDING

Trung Tran Duc, Tuan Dao Anh, Huong Chu Dieu

97-102
STUDY ON THE PHASE COMPOSITION OF THE COATING FORMED FROM WC-12Co POWDER USING HVOF SPRAYING METHOD

Nguyen Thanh Phu, Doan Thanh Hoa

103-109
A STUDY ON IMPROVING LISTENING SKILLS WITH DICTATION FOR SECOND ENGLISH MAJOR STUDENTS AT HUNG YEN UNIVERSITY OF TECHNOLOGY AND EDUCATION

Le Thi Thanh Nga, Nguyen Thi Anh Tuyet

110-116
OPTIMIZING THE SURFACE ROUGHNESS OF MACHINING CLAW ROTOR ON WIRE ELECTRICAL DISCHARGE MACHINE BASED ON THE TAGUCHI METHOD

Phan Ngoc Tuan, Duong Quoc Hieu, Tran The Van, Vu Duc Phuc

117-122
RESEARCHING THE EFFECT OF PILOT INJECTIONS IN THE COMBUSTION PROCESS HYUNDAI CRDI D4FA ENGINE ON AVL-BOOST SOFTWARE

Khong Van Nguyen

123-129
STUDY ON DETERMINING THE STANDARD TIME FOR SOME SEWING OPERATIONS BY THE MTM METHOD AND THE GSD PREDETERMINED TIME SYSTEM

Nguyen Thi Huong, Ngo Thi Thanh Mai, Pham Thị Lua, Do Quang Linh

130-136